Printing


Whether you send a quick draft to an inkjet or laser printer, provide a multicolored document to an outside service provider, or print a complex technical document with custom page sizes, you can set options in the Print dialog boxto ensure that the finished document appears as you intended.


Basic printing tasks

Print a PDF

If the desired printing option is in the Print dialog box, set it there rather than through the printer driver. The computer you wish to print a PDF from must be connected either to a local, shared, or network printer and be configured to use that printer.

 Choose File > Print Setup (Windows), File > Page Setup (Mac OS), or File > Print (UNIX) to choose a paper size, page orientation, and other general printing options. The options vary with different printers and drivers. See your printer driver documentation for details.

 To print comments, such as sticky notes, in the Preferences dialog box, choose Commenting and select Print Notes And Pop-ups.

Note: To open Preferences in Windows, choose Edit > Preferences. In Mac OS, choose Reader > Preferences.

 Click the Print button  , or choose File > Print.

 Choose a printer from the menu at the top of the Print dialog box.

 (Mac OS) Choose an option from the Presets pop-up menu.

 In Windows or UNIX, click Properties to set any additional options available with the printer driver. In Mac OS, set printer driver options in the Print Center.

 To print comments or forms, select an option from the Comments And Forms pop-up menu.

 Indicate which pages you want to print, and then click OK.

Print over the Internet

You can print open PDFs to a FedEx Kinkos office in the United States. This option isn’t available for UNIX.

Note: This feature is only available in the United States.

 Save the document, and then choose File > Send To FedEx Kinkos.

 Click OK to upload the document to the FedEx Kinkos print services website. You will then be guided through placing your print order.



Options in the Print dialog box

Most of the options in the Reader Print dialog box are the same for other applications, however there will be some minor variations that are operating system specific.

Comments And Forms Specifies which visible content prints.

Document  Prints the document contents and form fields.

Document And Markups  Prints document contents, form fields, and comments.

Document And Stamps Prints the document, form fields, and stamps, but no other markups, such as note comments and pencil lines.

Current View/Selected Graphic Prints the page area (including text, comments, and so on) that is visible in the current view. The option name changes depending on whether you have no pages selected (Current View), a page or pages selected (Selected Pages), or an area on a page selected using the Snapshot tool (Selected Graphic).

Current Page Prints the page that is visible in the current view.

Pages Specifies the range of pages to print in the open PDF. Separate numbers in a range by using a hyphen, and separate multiple pages or ranges by using commas or spaces. If the Use Logical Page Numbers option is selected in Page Display Preferences, you can enter numbers that match the numbering printed on the pages using roman numerals or actual page numbers. For example, if the first page of a document is numbered iii, you can enter iii or 1 to print that page. Selecting Odd Pages Only or Even Pages Only affects which pages in a range print. For example, in a range that includes 2, 7–10 with Even Pages Only selected, only pages 2, 8, and 10 will print.

To print from a specific page to the end of the document, enter the page with a hyphen. For example, “11-” prints  page 11 to the last page of the document.

Subset Choose All Pages In Range, or choose Odd Pages Only or Even Pages Only to print only those pages within the specified range.

Reverse Pages Prints pages in reverse order. If page ranges are entered, the pages print opposite of the order in which they were entered. For example, if the Pages box shows 3–5, 7–10, selecting Reverse Pages prints pages 10–7, and then 5–3.

Page Scaling Reduces, enlarges, or divides pages when printing.

None Prints the upper left or center of a page (if auto-rotated and centered) without scaling. Pages or selections that don’t fit on the paper are cropped.

Fit To Printable Area Reduces or enlarges each page to fit the printable area of the currently selected paper size. For PostScript® printers, the PPD determines the printable area of the paper.

Shrink To Printable Area Shrinks large pages to fit the currently selected paper size but doesn’t enlarge small pages. If an area is selected and is larger than the printable area of the currently selected paper, it’s scaled to fit the printable area.

Multiple Pages Per Sheet Enables N-up printing, where multiple pages print on the same sheet of paper. If this option is selected, you can also specify settings for Pages Per Sheet, Page Order, Print Page Border, and Auto-Rotate Pages.

Note: N-up printing in Acrobat is independent of the N-up printing features of printer drivers. The Reader print settings don’t reflect the N-up settings of the printer drivers. Select N-up printing either in Reader or in the printer driver, but not both.

Booklet Printing Prints multiple pages on the same sheet of paper in the order required to read correctly when folded. The printer must support duplex printing (printing on both sides of the sheet). Reader automatically enables duplex printing, if available, for booklet printing.

Pages Per Sheet Prints a predefined number of pages, or a custom number (up to 99), horizontally and vertically during N-up printing. If you select a predefined number from the menu, Reader automatically selects the best paper orientation.

Page Order Defines how the pages are ordered on paper during N-up printing. Horizontal places pages from left to right, top to bottom. Horizontal Reversed places pages from right to left, top to bottom. Vertical places pages top to bottom, left to right. Vertical Reversed places pages top to bottom, right to left. Both reversed options are suitable for Asian-language documents.

Print Page Border Draws the crop box (the page boundary of PDF pages) during N-up printing.

Auto-Rotate Pages Adjusts the PDF’s orientation to match the orientation specified in the printer properties during N-up printing.

Note: The Shrink To Printable Area option is always active for N-up printing. Therefore, the pages are always shrunk to fit the available imaging area regardless of how the Auto-Rotate And Center option is set.

Print To File (Windows/UNIX) Creates a device-dependent PostScript file of the document. The resulting file contains code for enabling and controlling specific device features, making it less compatible with devices other than the target device. For better results when creating PostScript files, use the Save As PostScript command. The Save As PostScript command isn’t available in Reader.

Note: You don’t need to have a PostScript printer to create a PostScript file.

Printing Tips If you’re connected to the Internet, this option connects to the Adobe website for information on how to troubleshoot printing problems.

Advanced Opens one or more panels for setting additional printing options.

See also


Print a portion of a page

 Choose Tools > Select & Zoom > Snapshot Tool.

 Drag around the area you want to print.

Reader copies the selected area to the clipboard.

 Choose File > Print to print the selection.

Print layers

Normally, when you print a PDF that contains layers, just the content that is visible on-screen is printed. However, the creator of a layered PDF can specify that some layered content, such as watermarks or confidential information, must (or must not) print, regardless of its visibility on-screen. If the document is designed to print differently from how it currently appears on-screen, a message may appear in the Print dialog box. The Preview image in the Print dialog box always shows the page as it will print.

Note: To work with layers in Acrobat, convert the source document to PDF using a preset that preserves layers, such as Acrobat 6 (PDF 1.5) or later.

View how layers print

 Click the Layers icon  in the navigation panel.




 Choose Apply Print Overrides from the Options menu.

Note: Depending on the visibility settings specified when the PDF was created, Apply Print Overrides may be unavailable in the Options menu.

Change print settings for a layer

 Click the Layers icon  in the navigation panel.

 Expand the layers area, select a layer, and then select Layer Properties from the Options menu.

 In the Layer Properties dialog box, choose one of the following from the Print pop-up menu:

Always Prints Forces the layer to print.

Never Prints Forces the layer not to print.

Prints When Visible Matches printed output to on-screen visibility.

Note: In Reader, you can open the Layer Properties dialog box, but you cannot change the settings.

Scale a document for printing

To print an oversized PDF on paper that has smaller dimensions, you can scale the document’s width and height to fit.

 Choose File > Print.

 From the Page Scaling menu, choose Fit To Printable Area or Shrink To Printable Area.


Other ways to print PDFs

About booklets

Booklets are documents with multiple pages arranged on sheets of paper that, when folded, present the correct page order. You can create 2-up saddle-stitched booklets, where two side-by-side-pages, printed on both sides, are folded once and fastened along the fold. The first page prints on the same printed sheet as the last page, the second page on the same sheet as the second-to-last page, and so on. Each page is automatically centered on the sheet, and large pages are scaled (shrunk) to fit the printable area. When you collate, fold, and staple the double-sided pages, the result is a single book with correct pagination.

To print booklets, your printer must support either automatic or manual duplex printing (printing on both sides of the paper). Manual duplex printing requires two separate printing passes: one to print the front side, and another to print the back side. To find out whether your printer supports duplex printing, check the printer manual, contact the printer manufacturer, or click the Properties button in the Print dialog box and look for options that mention two-sided or duplex printing.













3

1

2

3

4









1


















1
4


2
3






















Pages arranged in PDF (top), pages arranged in booklet layout (bottom), and pages printed and folded into new booklet

Print a booklet

 Choose File > Print and select the printer.

 Under Page Handling, choose Booklet Printing from the Page Scaling menu.

 In the Print Range area, specify which pages to print:

To print pages from front to back, select All.

To divide a large booklet into smaller groupings, select Pages and specify a page range for the first grouping. Print each page range separately.

To print certain pages on a different paper or paper stock, specify those pages using the Sheets From/To option. Click the Properties button and select the correct paper tray and any other options as necessary.

 Choose additional page handling options. The Preview image changes as you specify options.

Booklet Subset Determines which sides of the paper print. Choose Both Sides to automatically print both sides of the paper (your printer must support automatic duplex printing). Choose Front Side Only to print all pages that appear on the front side of the paper. After these pages print, flip them, choose File > Print again, and choose Back Side Only. Depending on the printer model, you might have to turn and reorder the pages to print the back sides.

To prevent others in a shared printing environment from printing on your pages before you print the back side, consider printing the back side pages using a different paper tray.

Auto-Rotate Pages Automatically rotates each page for the best fit in the printable area.

Sheets From Specifies the first and last sheet to print. Acrobat determines which sheets must print to accommodate the print job. For example, if you have a 16-page document, then sheets 1 through 4 print.

Binding Determines the orientation for the binding. Choose Left for text read left-to-right; choose Left (Tall) for paper folded on the long side, where the printable area is long and narrow. Choose Right for text read right-to-left or for Asian-style vertical reading; choose Right (Tall) for paper folded on the long side.




  
 mpare Right binding with Right (Tall).

Print documents in a PDF package

A PDF package contains multiple documents wrapped in one PDF. You can print the documents individually or together.

 Open the PDF package. You can select the cover sheet and print it on a different printer or paper stock.

 Choose File > Print, and then choose one of the following commands:

Print Current Document Prints the open PDF.

Print All Documents Prints all the PDFs in the package.

Print Selected Documents Prints some of the PDFs in the package. (This option is available only when multiple files are selected in the list of component documents.)

 Choose applicable printing options, and click OK. Documents are printed in the order they appear in the package.


Note: You must use the native application to print any component file that is not a PDF. When a non-PDF component is selected in the PDF package component list, you can click the Open button that appears in the Reader document pane to open the file’s native application, if it is installed on your computer.



See also


Print from the Bookmarks tab

You can print the pages associated with bookmarks directly from the Bookmarks tab. Bookmarks appear in a hierarchy, with parent bookmarks and child (dependent) bookmarks. If you print a parent bookmark, all page content associated with child-level bookmarks also print.

Not all bookmarks display page content, and therefore cannot be printed. For example, some bookmarks open a file or play a sound. If you select a mix of printable and nonprintable bookmarks, the nonprintable bookmarks are ignored.

Note: Bookmarks made from tagged content always display page content because the tagged content represents printable elements in the document structure, such as headings and figures.

 Open a PDF with bookmarks. If necessary, choose View > Navigation Panels > Bookmarks so the bookmarks appear in the navigation pane.

 Select one or more bookmarks, and then right-click/Control-click the selection.

 Choose Print Page(s) from the menu.

See also



Advanced print settings

About advanced print settings

If normal print settings don’t produce the results you expect, you may need to specify options in the Advanced Print Setup dialog box (Windows, Mac OS) or the Print dialog box (UNIX). For example, if your printed output doesn’t match the document’s on-screen appearance, you may need to try printing the document as an image. Or, if a PDF uses fonts that aren’t embedded, you must download the fonts to the printer when you print the document.

Set advanced print options

The Advanced Print Setup dialog box is available for PostScript and non-PostScript printers.


 In the Print dialog box, click Advanced.

 Set options for PostScript printers, and then click OK.


Note: Reader sets the PostScript level automatically, based on the selected printer.



PostScript options

In Windows or Mac OS, use the PostScript Options panel of the Advanced Print Setup dialog box to set options for a particular PostScript printer, such as how to handle nonresident printer fonts and whether to download Asian fonts. In addition, if a PDF contains device-dependent settings, such as halftones and transfer functions, these settings can be sent in the PostScript output to override the default settings in the printer. To use these options, you must be connected to a PostScript printer or have a PostScript printer driver installed with a PPD file selected.

In UNIX, use the Print dialog box to set the level of PostScript for your printer. Other available options include Download Asian Fonts, Optimize For Speed, and Save Printer Memory.

Print Method Specifies the level of PostScript to generate for the pages. Choose the level of PostScript appropriate for your printer.

Font And Resource Policy Specifies how fonts and resources in the document are sent to a printer when those fonts and resources aren’t present on the printer.

Send At Start Downloads all fonts and resources at the start of the print job. The fonts and resources remain on the printer until the job has finished printing. This option is the fastest but uses the most printer memory.

Send By Range Downloads fonts and resources before printing the first page that uses them, and then discards them when they are no longer needed. This option uses less printer memory. However, if a PostScript processor reorders the pages later in the workflow, it might not reorder the font downloading correctly, resulting in missing fonts. This option may not work with some printers.

Send For Each Page Downloads all fonts and resources for a given page before the page prints, and then discards the fonts when the page has finished printing. This option uses the least printer memory.

Download Asian Fonts Prints documents with Asian fonts that aren’t installed on the printer or embedded in the PDF. The Asian fonts must be present on the system.

Emit CIDFontType2 As CIDFontType2 (PS Version 2015 And Greater) Preserves hinting information in the original font when printing. If unselected, CIDFontType2 fonts are converted to CIDFontType0 fonts, which are compatible with a wider range of printers. This option is available for PostScript 3 and PostScript Level 2 (PostScript version 2015 and later) output devices.

Print As Image Prints pages as bitmap images. Select this option if normal printing doesn’t produce the desired results. This option is available only for PostScript printers.

Optimize For Speed (UNIX) Configures the print job for faster printing.

Save Printer Memory (UNIX) Downloads all fonts for a given page to the printer before the page is printed. If this option is unselected, the print job may be smaller but may require more printer memory.

Downloading Asian fonts to a printer

Select the Download Asian Fonts option if you want to print a PDF with Asian fonts that aren’t installed on the printer or embedded in the document. This option is in the Advanced Print Setup dialog box (Windows, Mac OS) or in the Print dialog box under Postscript options (UNIX). (Embedded fonts are downloaded whether or not this option is selected.) You can use this option with a PostScript Level 2 or higher printer. To make Asian fonts available for downloading to a printer, be sure you have downloaded the fonts to your computer using the Custom or Complete installation option during installation of Acrobat.

If Download Asian Fonts is not selected, the PDF prints correctly only if the referenced fonts are installed on the printer. If the printer has similar fonts, the printer substitutes those. If there are no suitable fonts on the printer, Courier is used for the text.




If Download Asian Fonts does not produce the results you want, print the PDF as a bitmap image. Printing a document as an image may take longer than using a substituted printer font.

Note: Some fonts cannot be downloaded to a printer, either because the font is a bitmap or because font embedding is restricted in that document. In these cases, a substitute font is used for printing, and the printed output may not match the screen display.

Comments

Popular posts from this blog

Index